All About Duplex Stainless Steel

Duplex Stainless Steel is a special type of steel that is used in corrosion resistant applications. In this article I am going to detail its disadvantages and advantages compared to other materials that are used in situations where corrosion prone environments are at hand.

Additionally, it contains varying amounts of carbon dioxide and manganese. Components, such as nickel and molybdenum, might also be added to introduce other valuable properties like enhanced formability and even more resistance to corrosion.

Stainless steel is used in everything from large architectural structures down to small chairs. By way of example, the famous Gateway Arch in St. Louis is 630 feet high and clad entirely with stainless steel.

While the anti-corrosive advantages of an iron-chromium alloy were known as far back as the early 19th century by French metallurgist Pierre Berthier, it wasn’t until the early 20th century as it was produced with just the right properties. There are many useful references regarding  Short piece of stainless steel (also known as  ” ท่อนสั้นแสตนเลส ” in Thai language ) at http://ecofittingvalve.com/ .

Stainless steel is generally divided into five types:

1. Ferritic

The simplest composition contains chromium and iron, which can be referred to as the ferritic stainless steels since their crystal structure is known as ferrite. These are magnetic and are used in products such as automobile trim and dishwashers.  If you are looking for all  Chonburi water supply joints (also known as c ” ข้อต่อประปา ชลบุรี ” in Thai language visit- http://www.ecofittingvalve.com/รายละเอียดสินค้า-4975-nipple-galvanized-steel.html .

2. Austenitic

The most common stainless steel group, austenitic’s microstructure comes from the addition of nickel, manganese, and nitrogen. Unlike ferritic, its structure is great for forming and welding. Some instances where austenitic steel may be used are in cookware and washing machine baskets.

3. Martensitic

Martensitic steels are very similar to ferritic, as they’re based on chromium. This allows them to be hardened and tempered. Martensitic is more commonly seen in long products than in sheet and plate form, and they’ve generally low weldability and formability. Examples of martensitic steel usage are cutlery and valve parts.

4. Duplex

The structure of duplex steels is about 50 percent ferritic and 50 percent austenitic, which gives them a higher strength than either of these steels. A duplex may be utilized in pipes and architectural constructions.

5. Precipitation Hardening

These steels can be very powerful by adding elements like copper, niobium, and aluminum to the mix. During a really higher heat treatment, very fine particles form in the steel that gives it its strength. Precipitation hardening steels can be machined to very intricate shapes.

Leave a Reply

Your email address will not be published. Required fields are marked *